Step-by-step HVAC troubleshooting
Fix your AC, furnace or heat pump problem before you call a technician
Plain-English guides that walk you through the symptoms, the likely causes and the safe checks you can do yourself.
Got a blinking light or code on your unit? Look up the error code →
Check these 5 things first
They take two minutes and fix a surprising number of "broken" systems.
- ThermostatSet to Heat or Cool, set point above or below room temperature, fresh batteries if it uses them.
- BreakerLook for a tripped breaker for the furnace, air handler or outdoor unit. Reset it once only.
- Power switchThe light-style switch on or near the furnace or air handler must be ON.
- Air filterA clogged filter can shut a system down or freeze the coil. Hold it to the light.
- Drain panWater in the pan under the indoor unit can trip a float switch that cuts the system off.
What's happening?
Tap the problem you have. We'll show you the guides that fix it.
Or pick your equipment
Latest troubleshooting guides
View all guides →
AC fan running but the compressor won't kick on? Check the capacitor, contactor, overload, wiring and refrigerant in order. Covers central and split AC units.
Read the guide →
Furnace inducer motor not turning on? Work through the thermostat, power, door switch, pressure switch, board and motor checks in order, and know when to call a pro.
Read the guide →How we write our guides
Read more →Safety first: turn off power at the breaker before opening any panel. If you smell gas, leave the house and call your gas company. Read our safety rules.






